03-14-2010, 03:31 PM
0
This is from their site:
Assembling the garage billboards
Brief instruction: How to style your garage
1. Take around 30-60 minutes of your time
2. Unpack the billboard
3. Adjust and/or trim the billboard to size if needed
4. Stick the enclosed Velcro to the moving part of the garage door
and on reverse of the garage billboard.
5. Stick the enclosed Velcro to the moving part of the garage door
and on reverse of the garage billboard.
6. Affix the billboard to the garage door
7. Mark the handle and cut the garage billboard in a slightly cross-shaped fashion.
8. That’s it!
Please note that the garage billboards are essentially designed for up-and-over garage doors. With a little patience, however, they can also be adapted to sectional and wing doors. Garage billboards are not, however, suitable for shutter doors.
Your garage billboard comes complete with a separate, self-adhesive Velcro fastener and can be attached immediately! The billboard is fitted in the same sort of way as a fly screen at the window.
It doesn’t matter what material (metal, wood, plastic, etc.) the up-and-over garage door is made from. The standard size of the garage billboard is: Height 2.10 m x width 2.45 m.
Assembling the garage billboards
Brief instruction: How to style your garage
1. Take around 30-60 minutes of your time
2. Unpack the billboard
3. Adjust and/or trim the billboard to size if needed
4. Stick the enclosed Velcro to the moving part of the garage door
and on reverse of the garage billboard.
5. Stick the enclosed Velcro to the moving part of the garage door
and on reverse of the garage billboard.
6. Affix the billboard to the garage door
7. Mark the handle and cut the garage billboard in a slightly cross-shaped fashion.
8. That’s it!
Please note that the garage billboards are essentially designed for up-and-over garage doors. With a little patience, however, they can also be adapted to sectional and wing doors. Garage billboards are not, however, suitable for shutter doors.
Your garage billboard comes complete with a separate, self-adhesive Velcro fastener and can be attached immediately! The billboard is fitted in the same sort of way as a fly screen at the window.
It doesn’t matter what material (metal, wood, plastic, etc.) the up-and-over garage door is made from. The standard size of the garage billboard is: Height 2.10 m x width 2.45 m.